Waste Water Discharge Permits
The purpose of the State wastewater discharge permit program (WAC 173-216) is to implement a state permit program applicable to the discharge of waste materials from industrial, commercial, and municipal operations into ground and surface waters of the state and into municipal sewerage systems. However, this regulation does not apply to discharges regulated by the National Pollutant Discharge Elimination System (NPDES) Permit Program or discharge of pollutants into waters of the state regulated by the waste discharge general permit program. Some examples of categories of Ecology’s Washington General permits (WAG) (WAC 173-226) are dischargers like concrete batch plants, seafood processors, dairy farms, etc.
To view each permit click on the individual links below.
Waste Water Discharge
At Hanford, the five state wastewater discharge permits are described below:
Per Washington Administrative Code (WAC) 173-216, the Department of Ecology (Ecology), as the permitting authority, formally transmits the State Waste Discharge Permit Number ST0004500 permit to the permittee U.S. Department of Energy.
Permit Number: ST0004500
The TEDF facility provides a collection, conveyance, and disposal system for treated effluent from buildings in the 200 Areas. It is located in the 200 East Area and consists of an 11-mile-long pipeline and two adjacent five-acre infiltration ponds. The TEDF facility receives, conveys, and disposes of wastewater from numerous Hanford Site locations. Wastewater generating processes include: non-contact cooling water, steam condensate, dryer condensate, air conditioning condensate, reverse osmosis unit brine, potable water, raw water, rainwater, miscellaneous effluents, water softener regenerant, filter backwash, boiler blowdown, and cooling tower blowdown. All of the water evolves from processes that do not have direct contact with industrial processes. The permit provides the terms and conditions that regulate the discharge of treated wastewater, via infiltration through soils, into groundwater of the state.
This Categorical State Waste Discharge Permit consists of four former State Waste Discharge Permits (ST4501, ST4508, ST4509, and ST4510). Categorical permits are unique to the Hanford Site and are not used elsewhere in the state. The Categorical permits are intended to provide compliance with regulations while providing a streamlined and cost-effective permitting approach. The wastewater discharges addressed in this permit include the discharge of hydrotesting, construction, and maintenance wastewater; the discharge of cooling water and condensate; and the collection and the discharge of industrial stormwater.
The 200 West Area Evaporative Sewage Lagoon is a new domestic wastewater treatment facility located northeast of the 200 West Area of the Hanford Site. The facility consists of double-lined evaporative lagoons and is designed to have no liquid discharge to the ground. The system will provide domestic wastewater treatment for the 200 West and 600 Areas, as well as provide treatment for domestic wastewater hauled from the 200 East Area and other locations within the Hanford Site. Initially, the United States Department of Energy (USDOE) will only truck wastewater to the facility. As existing on-site systems fail and new infrastructure is needed, USDOE may consider constructing a collection system within the 200 West and 600 Areas. USDOE constructed the 200 West Area Evaporative Sewage Lagoon, in part, to replace the existing 100-N Sewage Lagoon (State Waste Discharge Permit ST0004507) which is nearing the end of its service life. In addition, the majority of future Hanford Site cleanup activities will be centered around the 200 Area. The location of this new wastewater treatment facility will be centrally located to serve this growing population of workers.
Sand and Gravel Permits
Concrete Batch Plant • WAG-50-5180/Concrete Batch Plant:
This is a Washington State Sand and Gravel General Permit (WAG). These general state permits provide coverage for discharges of process water, storm water, and mine dewatering activities associated with Sand and Gravel operations and rock quarries. This would include stockpiles of mined materials, concrete batch operations, and hot mix asphalt operations. General wastewater discharge permits are renewed every five years. Permit conditions require the permit holder to provide environmental protection through best management practices (BMP) and wastewater treatment. A new state general permit became effective on October 1, 2010 and is effective for five years, through October 1, 2015. The concrete batch plant facility supports the construction of the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The primary function is making concrete. Bechtel National is the owner of the permit and the operator is Ready Mix Concrete.
Pit 30 Quarry • WAG-50-5181/Pit 30 Quarry:
This is a Washington State Sand and Gravel General Permit (WAG) just as the concrete batch plant above. General wastewater discharge permits are renewed every five years. Permit conditions require the permit holder to provide environmental protection through best management practices (BMP) and wastewater treatment. A new state general permit became effective on October 1, 2010 and is effective for five years, through October 1, 2015. The Pit 30 Quarry supports the construction of the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Primary function is making gravel. Bechtel National is the owner of the permit and the operator is Ready Mix Concrete.
For more information about the Waste Water Discharge and Sand and Gravel permits please contact Stephanie Schleif - Facility Transition Project Manager, (509) 372-7950