Data format: SDE Feature Class
File or table name: ROPA.FIRE_PROT_DIST
Coordinate system: Lambert Conformal Conic
Theme keywords: Fire Districts
| Washington State Fire Protecton Districts | |
|
|
Data format: SDE Feature Class File or table name: ROPA.FIRE_PROT_DIST Coordinate system: Lambert Conformal Conic Theme keywords: Fire Districts |
|
Abstract:
This is a spatial view of Washington County Fire Protection Districts and Municipal fire Departments. |
|
Metadata elements shown with blue text are defined in the Federal Geographic Data Committee's (FGDC) Content Standard for Digital Geospatial Metadata (CSDGM). Elements shown with green text are defined in the ESRI Profile of the CSDGM. Elements shown with a green asterisk (*) will be automatically updated by ArcCatalog. ArcCatalog adds hints indicating which FGDC elements are mandatory; these are shown with gray text.
This is a spatial view of Washington County Fire Protection Districts and Municipal fire Departments.
This is used by DNR for fire protection and fire Prevention purposes to determine fire protection juisdictions.
publication date
User must agree to DNR conditions for use.
Fire District boundaries shapefiles were provided by counties to build this coverage. Boundaries were normalized to fit within county boundaries.
All compleate as of date of publication
Contributed by county local development and planning departments between 1994, and 2004.
Oracle select statment for generating this spatial view.
select
a.objectid,
a.shape,
a.fpd_id,
c.fpdnm_nm,
a.fpd_dist_no,
b.county_nm,
a.fpd_munp_flg
from ROPA.fire_prot_dist a,
SILV.COUNTY_CODE@PROD.WORLD b,
FMANFIRE.fpd_name_code@PROD.WORLD c
where a.fpdnm_cd = c.fpdnm_cd
and a.county_cd = b.county_cd
Metadata imported.
Metadata imported.
Internal feature number.
ESRI
Municiipal fire Department flag
Defines either municipal fire Departments, or county Fire Protection districts. Y equals a department, N equals fire district.
The fire protection district is a city fire department
The fire protection district is a county fire district
Feature geometry.
ESRI
Fire Protect District Primary Key
Oracle FPD_ID_SEQ Sequence
Fire district number
As listed in the Washington State Association of Fire Commisioners 2004 Fire Service directory.
Disclaimer This digital data and metadata, (hereinafter collectively referred to as the "information"), are provided on an "AS IS", "AS AVAILABLE" and "WITH ALL FAULTS" basis. Neither Department of Natural Resources nor any of its officials and employees makes any warranty of any kind for this information, express or implied, including but not limited to any warranties of merchantability or fitness for a particular purpose, nor shall the distribution of this information constitute any warranty. The information is collected from various sources and will change over time without notice. DNR and its officials and employees assume no responsibility or legal liability for the accuracy, completeness, reliability, timeliness, or usefulness of any of the information provided nor do they represent that the use of any of the information will not infringe privately owned rights. The information is not intended to constitute advice nor is it to be used as a substitute for specific advice from a licensed professional. You should not act (or refrain from acting) based upon the information without independently verifying the information and, as necessary, obtaining professional advice regarding your particular facts and circumstances. References to any specific commercial product, process, and service by trade name, trademark, or manufacturer do not constitute or imply endorsement, recommendation, or favoring by DNR and its officials and employees. IN NO EVENT WILL DNR BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THE DIGITAL DATA, EVEN IF DNR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
PO Box 47037